Dienstag, 12. April 2016

Color Slicing using HSV color space

Figure 1. 


   




          HSV color space can be used for assigning different colors to the foreground and background of the same image conveniently  in comparison to the equivalent RGB image. HSV color space consists of 3 components namely the Hue, the Saturation and the Value.


In MATLAB, HSV color space of an image is three dimensional matrix and each matrix represents each of the 3 component (Hue,Saturation,Value). Hue and saturation range between zero and one. While saturation defines colorfulness hue is specific to the color.













%MATLAB CODE:
A = imread('swimmer.jpg');

figure,imshow(A);title('Original Image');



Original Image
HSV = rgb2hsv(A);
H = HSV(:,:,1); %Hue
figure,imshow(H);colorbar;

Hue

H( H > mean2(H) ) = 1;
HSV(:,:,1) = H;

C = hsv2rgb(HSV);
figure,imshow(C);title('Hue Modified');
Hue Modified

EXPLANATION:

The original image is in RGB  format and it is converted to HSV color space using the MATLAB command ‘rgb2hsv’. The resultant is a three dimensional matrix with Hue, Saturation and Value components in each one of them. By comparing the original RGB image and the Hue component, we can understand that the blue color as high value comparing to other colors in the original image.

Hue is a color wheel, where the colors start from red, then move on to yellow, green, cyan, blue, magenta and ends up again in red.
In our example,the values above the average in the Hue matrix is made 1.(i.e. red). The background of the image is changed from blue to red.

If  the whole image including the swimmer needs to be changed to red then instead of finding the average or masking the image, assign zero or 1 to Hue matrix.
After the modification, use ‘hsv2rgb’ command to return back to RGB color space.

%MATLAB CODE:

HSV = rgb2hsv(A);
S = HSV(:,:,2); %Saturation
figure,imshow(S);colorbar;


Saturation


S(:,:)=0;
HSV(:,:,2) = S;

C = hsv2rgb(HSV);
figure,imshow(C);title('Saturation Modified');

Saturation Modified

 EXPLANATION:
 In this example, the saturation component is modified. The high values of Saturation illustrates that the regions are bright and colorful while the low values illustrates that they are dull and colorless.When saturation matrix is made zero, the colorfulness is completely lost. The above figure clearly shows the gray shade image that is obtained as a result of modifying the saturation matrix.


%MATLAB CODE:

HSV = rgb2hsv(A);
H = HSV(:,:,1); %Hue
S = HSV(:,:,2); %Saturation

H( H > mean2(H) ) = 0.42;
S( H < mean2(H) )=0;
S( H >= mean2(H) )=1;

HSV(:,:,2) = S;
HSV(:,:,1) = H;


C = hsv2rgb(HSV);
figure,imshow(C);title('Saturation Modified - Background');

EXPLANATION:
In this example, both the Hue and the Saturation matrices are modified simultaneously. The background color is changed from blue to green after changing the Hue matrix. The Saturation matrix is changed partially such that the background is not affected but the color on the swimmer is made gray.

%MATLAB CODE:
HSV = rgb2hsv(A);
H = HSV(:,:,1); %Hue
S = HSV(:,:,2); %Saturation


S( H < mean2(H) )=1;
S( H >= mean2(H) )=0;

HSV(:,:,2) = S;
HSV(:,:,1) = H;


C = hsv2rgb(HSV);
figure,imshow(C);title('Saturation Modified - Foreground');

EXPLANATION:
In this example, the background color is made shades of gray while the swimmer still retains the color. The masking is done based on the foreground and background on the saturation matrix and a value of zero is assigned to the background and one is assigned to foreground. From this example, it is evident that if the saturation matrix contains zero then the image in RGB color space will contain shades of gray whereas if the saturation matrix contains one then it will contain fully saturated more colorful image in the RGB color space.

The image(Figure.1) above shows the swimmer and different background colors by modifying the Hue matrix.

Keine Kommentare:

Kommentar veröffentlichen